Carbonised Grease Remover – Caustic Gel

pH 12–13 caustic-enhanced formula. high-alkalinity caustic base penetrates and breaks down the cross-linked polymer matrix of carbonised grease — the chemical state that standard alkaline degreasers at pH 11–12 cannot effectively dissolve.

Gel delivery system. viscosity-modified to cling to vertical oven walls, hood surfaces, grill grates, and overhead extraction surfaces — contact time is where carbonised grease dissolution happens, and the gel ensures that contact time regardless of surface orientation.

Dual-mechanism action. saponification converts fat residues to water-soluble compounds; caustic hydrolysis breaks polymerised carbon chains — together addressing both the grease matrix and the carbonised crust in a single application.

Designed for scheduled deep-clean cycles. weekly or bi-weekly application to commercial kitchen equipment prevents the carbonised accumulation that creates fire risk and compromises food safety audit compliance.

Mandatory rinse protocol. high-alkalinity residue must be thoroughly rinsed from all food-contact surfaces before operation — the rinse step is a food safety requirement, not optional.

What makes carbonised grease chemically different from ordinary grease, and why does it require a different product?
Fresh cooking grease is primarily triglycerides — esters of glycerol and fatty acids. Standard alkaline degreasers at pH 9–12 saponify these esters, converting them to soluble glycerol and soap-like fatty acid salts that rinse away with water.

Surface preparation. Remove loose debris. Ensure the surface is at ambient temperature — do not apply to hot surfaces above 40°C.

Active system

Caustic-enhanced high-alkalinity saponification

pH

12.0–13.0 (strongly alkaline)

Formulation type

Viscosity-modified gel — vertical surface adhesion

Appearance

Thick opaque gel

Dwell time

20–60 minutes depending on deposit severity

Rinse after use

Yes — mandatory, especially on food-contact surfaces

Safe on

Stainless steel, cast iron, enamel-coated surfaces, ceramic tiles, concrete

Avoid on

Aluminium, galvanised surfaces, soft metals — caustic attacks these substrates

PPE

Chemical-resistant gloves and eye protection — mandatory

Shelf life

24 months from date of manufacture, unopened

Pack size

5 Litres

MSDS / TDS

QR code on label · Available on request

• DANGER — strongly alkaline.
• For professional and institutional use only.
• Causes severe skin burns and eye damage on contact with concentrate.
• Wear chemical-resistant gloves and eye protection at all times during handling and application.
• Do not apply to hot surfaces.
• Never mix with acid-based cleaners — reaction generates heat and may cause dangerous spattering.
• Keep out of reach of children.
• Store in original sealed container below 30°C, away from acids, heat sources, and direct sunlight.
• Do not store in aluminium containers — caustic attacks aluminium.
• Keep container tightly sealed.
• Shelf life 24 months from manufacture date, unopened.
• In case of skin contact, flush immediately with copious water for 15–20 minutes.

For professional and institutional use only

Material Safety Data Sheets (MSDS) and Technical Data Sheets (TDS) are available on request and accessible via the QR code printed on the product label. These documents provide full hazard classification, first-aid procedures, disposal guidance, and technical performance data for compliance and audit purposes.

MSDS / TDS requests: care@allesclinx.com

Bulk & institutional supply enquiries: procurement@allesclinx.com