Description
Highlights—
Heavy-duty alkaline degreaser. built to strip baked-on grease, carbon deposits and food residue from grills, ovens, and prep equipment — a cleaning step, not a maintenance polish.
Non-scratch surfactant system. cleans without abrasive particles, protecting the brushed finish of stainless steel and preventing micro-scratches that trap future soil and bacteria.
Cuts through carbonised residue. effective on stubborn, oven-baked and grill-charred soil that ordinary daily wipe-downs and the maintenance polish alone cannot remove.
Rinseable, food-service compatible. formulated to rinse cleanly from food-contact equipment surfaces, unlike a leave-on polish film.
Pairs with Stainless Steel & Chrome Polish. intended as the deep-clean step before applying the lighter maintenance polish for shine and fingerprint resistance.
The chemistry—
Why does baked-on kitchen grease need a different approach from a routine wipe-down polish, and why avoid abrasives on stainless steel? Repeated heat exposure oxidises and partially carbonises food fats on grills and oven surfaces, cross-linking them into a hardened residue that ordinary surfactant cleaning cannot fully dissolve without help. This formula uses a higher-alkalinity builder to accelerate saponification of the fat component, loosening the residue’s grip on the metal surface so the surfactant blend can lift it away.
Abrasive scouring pads or gritty cleaners are a common shortcut for this kind of soil, but they create microscopic scratches in stainless steel’s protective chromium oxide layer. These scratches don’t just look worse over time — they give bacteria a physical foothold that survives routine sanitising, which is a real food-safety concern on repeatedly abraded equipment. This formula is designed to do the same soil-lifting job chemically rather than mechanically, so the passivation layer stays intact.
Application & usage—
Dilute. 1:10 in warm water for routine equipment cleaning; use at 1:3 or neat on heavily carbonised grill and oven surfaces.
Apply, dwell & rinse. apply with a cloth or non-abrasive pad, allow 5 minutes dwell time on heavy soil, wipe clean, then rinse thoroughly with clean water before returning equipment to food-contact use.
Product specifications—
Active system
Alkaline builder + non-abrasive surfactant blend
pH
10.5–12.0 (alkaline)
Formulation type
Liquid concentrate
Fragrance
Mild neutral
Dilution
1:3 to 1:10 depending on soil level; neat for heaviest carbon deposits
Application
Cloth or non-abrasive pad, dwell & wipe
Rinse after use
Yes — thorough rinse required on food-contact surfaces
PPE
Gloves recommended; eye protection for concentrate/neat use
Shelf life
24 months from date of manufacture, unopened
Pack size
5 Litres / Bulk on request
MSDS / TDS
QR code on label · Available on request
Caution & storage—
- Concentrate/neat use is corrosive — avoid contact with eyes and prolonged skin contact.
- In case of eye contact, rinse immediately with copious clean water for 15 minutes and seek medical advice.
- Always rinse thoroughly before returning equipment to food-contact use.
- Do not mix with acidic or ammonia-based cleaning products.
- Keep out of reach of children.
- Store in original sealed container below 30°C, away from direct sunlight and acids.
- Shelf life 24 months from manufacture date, unopened.
Resources & documentation—
Material Safety Data Sheets (MSDS) and Technical Data Sheets (TDS) are available on request and accessible via the QR code printed on the product label.
MSDS / TDS requests: care@allesclinx.com
Bulk & institutional supply enquiries: procurement@allesclinx.com
