Description
Best suited for. Low-foam extraction cleaning of compatible carpets and upholstery.
Choose this when. You need a concentrate designed for hot-water extraction, wet-extraction machines or controlled spot treatment.
Choose another product when. You are using dry-compound equipment, a dry vacuum system, or a surface that does not permit liquid extraction cleaning.
Highlights
Low-foam extraction formula. Engineered for hot-water extraction machines — excess foam interferes with suction and slows machine recovery in these systems.
Soil-release polymer. Encapsulates loosened dirt particles so they lift away with extraction rather than re-depositing into carpet fibres during the cleaning pass.
Fast-drying formulation. Reduced residual moisture retention supports quicker turnaround between events in banquet and function spaces.
Fresh floral fragrance. Leaves treated carpets and upholstery smelling clean without an overpowering chemical scent lingering into event use.
Colourfast on common fibres. Intended for compatible commercial carpet and upholstery fibres at the recommended dilution; test colourfastness in an inconspicuous area before full use.
How to use & dilute
5 L extraction tank. Add 100–150 ml concentrate.
10 L extraction tank. Add 200–300 ml; for a 20 L tank add 400–600 ml.
Spot treatment. For a 500 ml hand-prepared spot solution, use 10 ml concentrate. Extract/rinse thoroughly and allow the textile to dry completely.
Equipment & dispenser compatibility
Compatible equipment. Hot-water extraction machines, wet-extraction carpet machines and portable upholstery extractors designed for low-foam liquid detergent.
Use conditions. Dose through the machine solution tank at the product-specific working concentration and follow the equipment manufacturer’s defoaming, recovery and rinse guidance.
Not intended for. Not intended for dry vacuum cleaners, dry-compound carpet systems or equipment that prohibits liquid extraction detergents.
The chemistry
Why does extraction-machine cleaning require a low-foam formula, and what does the soil-release polymer actually prevent?
Hot-water extraction machines work by injecting a cleaning solution into carpet pile under pressure and immediately vacuuming it back out along with suspended soil.
Usage economy
Extraction yield. At 20–30 ml/L, a 5 L pack can dose roughly 167–250 L of extraction water.
Tank planning. A 10 L extraction tank uses approximately 200–300 ml concentrate.
Dose control. Match concentration to soil load and machine recovery performance; excess detergent can increase residue and re-soiling.
Product specifications
Active system
Low-foam surfactant blend + soil-release polymer
pH
7.0–8.5 (mild alkaline)
Formulation type
Liquid concentrate
Fragrance
Fresh floral
Dilution
20–30 ml/L (extraction) · 10 ml/500 ml (spot treatment)
Application
Hot-water extraction machine / spot treatment cloth
Rinse after use
Extracted by machine; rinse cloth-applied spots with clean water
PPE
Gloves recommended for concentrate handling
Shelf life
24 months from date of manufacture, unopened
Pack size
5 L / Bulk on request
HSN Code
34029099
Manufactured by
Champaran Innovatives Private Limited, India
Water quality
Performance can vary with local water hardness. Use the lowest effective dose and follow site water-treatment guidance where hard water causes residue, weak cleaning or excess product use.
Caution & storage
Textile test. Test colourfastness and backing compatibility before broad extraction cleaning, particularly on wool blends, natural dyes or speciality upholstery.
Over-wetting. Avoid over-saturating carpet, backing, timber subfloors or upholstered furniture. Extract thoroughly and keep electrical equipment protected from liquid.
Storage. Keep concentrate tightly closed and protected from direct sunlight, excessive heat and contamination. Do not mix with bleach or other concentrated cleaners.
Safety & procurement
Safety data / product-specific documentation. care@allesclinx.com
Bulk & institutional procurement. procurement@allesclinx.com
