Instrument Pre-Soak – Multi-Enzyme

Original price was: ₹2,725.80.Current price is: ₹2,385.08. incl. GST (₹2,021.25 excl. GST)

50 in stock

Multi-Enzyme Formula

with Protease + Lipase + Amylase Blend

Instrument Pre-Soak & Enzymatic Cleaning

for reusable instruments & laboratory equipment in controlled reprocessing workflows

View Instrument Pre-Soak – Multi-Enzyme details

Description

Best suited for. Pre-cleaning of reusable instruments in manual soak basins, ultrasonic baths or compatible washer-disinfectors.

Choose this when. You need low-foam multi-enzyme chemistry to loosen dried organic soil before the downstream reprocessing cycle.

Choose another product when. You need terminal disinfection or sterilisation; this product is a cleaning pre-treatment, not a substitute for those steps.

Highlights

Triple-enzyme blend. Protease breaks down blood and protein soil, lipase targets fats, and amylase clears starch residue — targeting protein, fat and starch soils on reusable instruments and laboratory equipment.

Pre-soak & ultrasonic compatible. Formulated for manual pre-soak basins and ultrasonic cleaning baths before the facility’s downstream reprocessing step.

Low-foam formula. Suitable for ultrasonic and mechanical washer-disinfector use where excess foam would interfere with cavitation and cleaning action.

Material-safe. Non-corrosive to stainless steel, aluminium, and common instrument finishes at recommended dilution and soak time.

Neutral pH. Reduces the risk of instrument surface damage versus alkaline pre-soak alternatives over repeated processing cycles.

How to use & dilute

5 L basin. Add 25–50 ml concentrate.

10 L basin. Add 50–100 ml; for a 15 L basin use 75–150 ml.

Use. Fully submerge pre-rinsed instruments for the stated 5–10 minute soak, then rinse thoroughly before the facility’s downstream disinfection/sterilisation process.

Equipment & dispenser compatibility

Compatible equipment. Manual pre-soak basins, ultrasonic cleaning baths and washer-disinfectors where the equipment manufacturer permits a low-foam enzymatic detergent.

Use conditions. Calibrated dosing pumps may be used where the machine programme, temperature, concentration and material compatibility match the facility reprocessing SOP.

Not intended for. This is a cleaning pre-treatment, not a sterilant or terminal disinfectant; equipment compatibility does not replace the facility’s downstream reprocessing cycle.

The chemistry

Why use a multi-enzyme pre-soak instead of a standard detergent for instrument cleaning?
Instrument soil can include protein, fat and starch-based residues, each requiring a different breakdown mechanism.

Usage economy

Approximate prepared yield. At 5–10 ml/L, a 5 L pack can dose roughly 500–1,000 L of pre-soak water.

Basin planning. For a 10 L basin, use approximately 50–100 ml; prepare only the volume required for the instrument load.

Process control. Replace visibly soiled working solution and keep the pre-soak step separate from downstream disinfection or sterilisation.

Product specifications

Active system

Protease + lipase + amylase enzyme blend

pH

6.5–7.5 (neutral)

Formulation type

Low-foam liquid concentrate

Fragrance

None

Dilution

5–10 ml per litre (1:100 to 1:200)

Application

Manual pre-soak basin / ultrasonic bath

Rinse after use

Yes — thorough rinse required before the facility’s downstream reprocessing step.

PPE

Gloves recommended when handling soiled instruments

Shelf life

18 months from date of manufacture, unopened

Pack size

5 L / Bulk on request

HSN Code

34029099

Manufactured by

Champaran Innovatives Private Limited, India

Contact time

Fully submerge and soak 5-10 minutes (minimum 1 minute for light soil; up to 15 minutes for heavily dried-on organic soil)

Water quality

Performance can vary with local water hardness. Use softened or treated water where the facility procedure or equipment guidance calls for it.

Caution & storage

Contaminated instruments. Wear appropriate gloves when handling soiled instruments and avoid creating aerosols from the pre-soak bath.

Process limit. This is a cleaning pre-treatment, not terminal disinfection or sterilisation. Do not mix the enzyme solution with bleach or disinfectants unless the reprocessing procedure specifically requires it.

Storage. Keep the concentrate tightly closed and protected from excessive heat and direct sunlight. Use clean dosing equipment and replace visibly soiled working solution.

Safety & procurement

Safety data / product-specific documentation. care@allesclinx.com

Bulk & institutional procurement. procurement@allesclinx.com

Additional information

Weight5.25 kg
Dimensions24 × 14 × 32 cm
Pack availability

5L (priced online), 25L (institutional enquiry), 50L (institutional enquiry)

Let's talk.

We'll use your details to respond. Privacy

Send a message instead