Description
Highlights—
10% w/v available chlorine. high-strength concentrate for dilution into working disinfectant, surface bleach, and effluent treatment solutions — not a ready-to-use retail bleach.
Broad-spectrum oxidising action. effective against bacteria, viruses, fungi, and spores at appropriate contact time and dilution — the reference-standard disinfectant active for high-risk environments.
Dual-purpose formulation. functions as both a disinfectant (at lower dilution) and a bleaching/whitening agent (at higher concentration) for lab glassware, drains, and hard surfaces.
Stabilised alkaline carrier. alkaline pH slows chlorine off-gassing and extends shelf stability versus unstabilised hypochlorite solutions.
Cost-effective at scale. one of the lowest per-litre-of-disinfectant costs available — dilutable to very high working volumes for institutional and industrial use.
The chemistry—
How does sodium hypochlorite disinfect, and why does concentration and contact time matter so much?
In water, sodium hypochlorite establishes an equilibrium between hypochlorite ion (OCl⁻) and hypochlorous acid (HOCl). HOCl is the dominant active species responsible for microbial kill — it penetrates cell walls and oxidises proteins, enzymes, and nucleic acids, disrupting cellular function irreversibly.
Application & usage—
General disinfection. Dilute 1:50 in water (approx. 1000 ppm available chlorine) for routine hard-surface and drain disinfection. Allow 10 minutes contact time, then rinse.
High-risk decontamination. Dilute 1:10 for spill decontamination or high-risk surface disinfection. Allow minimum 10–20 minutes contact time per facility protocol.
Product specifications—
Active
Sodium Hypochlorite 10% w/v available chlorine
pH
11.0–13.0 (alkaline, stabilised)
Formulation type
Aqueous concentrate
Fragrance
None — characteristic chlorine odour
Dilution
1:10 to 1:50 depending on application
Application
Surface disinfection, drain treatment, laboratory decontamination
Rinse after use
Yes — rinse treated surfaces after contact time
PPE
Gloves and eye protection required — concentrate is corrosive
Shelf life
12 months from date of manufacture, unopened, stored below 25°C
Pack size
5 Litres / Bulk on request
MSDS / TDS
QR code on label · Available on request
Caution & storage—
- Corrosive concentrate — always dilute in a ventilated area before use.
- Never mix with acids, ammonia, or other cleaning chemicals — releases hazardous chlorine gas.
- Avoid contact with eyes and skin. Wear gloves and eye protection when handling concentrate.
- In case of eye or skin contact, rinse immediately with copious clean water for 15 minutes and seek medical advice.
- Keep out of reach of children.
- Store in original sealed container below 25°C, away from direct sunlight and incompatible chemicals.
- Shelf life 12 months from manufacture date, unopened.
For professional and institutional use only
Resources & documentation—
Material Safety Data Sheets (MSDS) and Technical Data Sheets (TDS) are available on request and accessible via the QR code printed on the product label.
MSDS / TDS requests: care@allesclinx.com
Bulk & institutional supply enquiries: procurement@allesclinx.com
