Multisurface Cleaner – Lime

Single SKU replaces up to three. floors, walls, counters, and fixtures — one product, one procurement event, one MSDS, one staff training protocol.

Neutral pH 6.5–7.5. safe across the full range of hard surface substrates in healthcare, industrial, and educational environments without substrate damage risk.

1:4 dilution. 5L yields 20 litres — precise, auditable working solution volume for procurement budgeting and cost-per-application tracking.

No rinsing on most surfaces. faster cleaning cycle completion — operationally significant in facilities running 3–4 cleaning rotations daily.

Lime fragrance. appropriate for occupied healthcare, industrial, and educational environments — fresh signal without chemical edge.

Why is neutral pH the correct specification for a multipurpose institutional surface cleaner? Surface cleaners operate within a pH range that creates a fundamental trade-off: alkaline formulations (pH 9–12) are more effective at saponifying oils and fats but carry substrate damage risk on acid-sensitive materials — marble, certain composite tiles, anodised aluminium — and require rinsing on food-contact and sensitive surfaces.

Acidic formulations (pH 1–5) dissolve mineral deposits effectively but damage alkaline-sensitive substrates and cannot be used on most metals without corrosion risk. A neutral pH formulation at 6.5–7.5 resolves this trade-off for general surface cleaning by operating in the range where the surfactant system carries the primary cleaning burden rather than pH-driven chemical reactions.

At neutral pH, well-formulated anionic and nonionic surfactants provide effective soil emulsification, suspension, and removal across the full range of everyday institutional surface soiling — dust, organic residues, hand contact marks, light grease — without the substrate specificity constraints of pH extremes. The practical consequence is a formulation that can be specified as the single general-purpose surface cleaner across an entire institutional facility — floors, walls, counters, washroom fixtures, and educational classroom surfaces — without requiring staff to select between products based on surface type. In environments with rotating housekeeping teams and variable staff training depth, this substrate-neutral specification is a meaningful risk reduction.

Multipurpose cleaners reduce SKU count in a facility’s chemical store by up to 60%. That’s not just a storage saving — it means fewer MSDS files, fewer staff training events, and fewer vendor relationships to manage. One product is a procurement strategy, not a compromise.

Dilution 250 ml per litre of water (1:4 ratio).

One product. Three cleaning categories.

Twenty litres per 5-litre pack. At 1:4 dilution, a single 5L pack yields 20 litres of working solution — sufficient for a 10,000 sq ft institutional facility cleaned twice daily across all hard surfaces for approximately 3 weeks.

The SKU rationalisation value is additional: replacing three separate surface cleaners with one product reduces procurement event frequency, storage requirement, and training overhead — costs that do not appear on the chemical spend line but are real institutional overheads. For healthcare facilities operating under infection control programme audits, the documented single-product cleaning protocol simplifies housekeeping SOP documentation and reduces the risk of incorrect product selection by rotating staff.

Active system

Anionic + non-ionic surfactant blend — general purpose

pH

6.5–7.5 (neutral)

Specific gravity

1.00–1.02 at 25°C

Formulation type

Aqueous concentrate

Appearance

Clear to slightly hazy liquid

Fragrance

Lime — calibrated for institutional environments

Dilution

250 ml per litre of water (1:4)

Application

Mop / spray bottle / damp cloth

Surfaces

Floors, walls, counters, washroom fixtures, general hard surfaces

Avoid on

Polished natural stone — test at undiluted concentration before full use

Rinse after use

Not required on most surfaces

PPE

None at working dilution

Shelf life

24 months from date of manufacture, unopened

Pack size

5 Litres concentrate

MSDS / TDS

QR code on label · Available on request

🚨 For professional and institutional use only

• For professional use.
• Avoid prolonged skin contact with concentrate.
• In case of eye contact, rinse immediately with water.
• Keep out of reach of children.
• Test on polished marble or acid-sensitive natural stone surfaces before applying undiluted — neutral pH at concentrate strength may affect sensitive surface finishes.
• Store in original sealed container below 30°C, away from direct sunlight.
• Keep container tightly closed when not in use.
• Shelf life 24 months from manufacture date, unopened.

Material Safety Data Sheets (MSDS) and Technical Data Sheets (TDS) are available on request and accessible via the QR code printed on the product label. These documents provide full hazard classification, first-aid procedures, disposal guidance, and technical performance data for compliance and audit purposes.

MSDS / TDS requests: care@allesclinx.com

Bulk & institutional supply enquiries: procurement@allesclinx.com