Description
Highlights—
Deep-penetrating formula. engineered to lift oil, grease, and hydraulic fluid that has soaked into porous, unsealed concrete — not just surface-level soiling.
Solvent-boosted alkaline system. combines high alkalinity with a controlled solvent fraction to emulsify heavy petroleum-based soils that alkalinity alone cannot fully break down.
Machine & manual application. compatible with scrubber-dryers, pressure washers, and manual mop-and-scrub application across large floor areas.
Reduces slip hazard. removes the oil film responsible for slip-related incidents in factory and warehouse traffic zones.
Concentrated for bulk use. designed for dilution at scale across large industrial floor areas rather than spot-cleaning volumes.
The chemistry—
Why does concrete floor degreasing need both alkalinity and solvent, when many degreasers rely on one or the other? Unsealed concrete is porous, and industrial oils — hydraulic fluid, lubricants, engine oil — penetrate below the surface rather than sitting on top of it, where a purely aqueous surfactant system struggles to reach.
The alkaline component saponifies accessible fats and breaks the surface tension holding oil to the concrete pore structure, while the solvent fraction physically dissolves and thins heavier petroleum-based soils, allowing them to be drawn out of the pores and into the aqueous phase where the surfactant system can then suspend and rinse them away. This combined action is why solvent-boosted alkaline degreasers consistently outperform single-mechanism cleaners on aged, deeply penetrated floor staining.
Application & usage—
Dilute. 1:10 to 1:20 in water for routine cleaning; use neat or at 1:5 for heavily soiled or long-neglected areas.
Apply & agitate. apply with mop, scrubber-dryer or pressure washer, allow 5–10 minutes dwell time on heavy soiling, agitate, then rinse or wet-vacuum thoroughly.
Product specifications—
Active system
Alkaline builder + surfactant blend + solvent fraction
pH
11.0–13.0 (alkaline)
Formulation type
Aqueous concentrate
Fragrance
Mild industrial-neutral
Dilution
1:5 to 1:20 depending on soil level
Application
Mop, scrubber-dryer, or pressure washer
Rinse after use
Yes — rinse or wet-vacuum after dwell time
PPE
Gloves and eye protection recommended for concentrate handling
Shelf life
24 months from date of manufacture, unopened
Pack size
5 Litres / Bulk on request
MSDS / TDS
QR code on label · Available on request
Caution & storage—
- Concentrate is corrosive — avoid contact with eyes and prolonged skin contact.
- In case of eye contact, rinse immediately with copious clean water for 15 minutes and seek medical advice.
- Ensure adequate ventilation during application in enclosed factory/warehouse areas.
- Do not mix with acidic cleaning products.
- Keep out of reach of children.
- Store in original sealed container below 30°C, away from direct sunlight and acids.
- Shelf life 24 months from manufacture date, unopened.
Resources & documentation—
Material Safety Data Sheets (MSDS) and Technical Data Sheets (TDS) are available on request and accessible via the QR code printed on the product label.
MSDS / TDS requests: care@allesclinx.com
Bulk & institutional supply enquiries: procurement@allesclinx.com
