Description
Best suited for. Routine appearance maintenance of stainless steel and chrome after normal cleaning.
Choose this when. You want a ready-to-use polish for fingerprints, light marks and a cleaner visual finish.
Choose another product when. You need heavy grease removal, mineral-scale treatment, rust removal or automatic warewashing chemistry.
Highlights
Streak-free polish action. Lifts grease, water spots and fingerprints from stainless steel and chrome without leaving a residue film under kitchen or dining lighting.
Fingerprint-resistant finish. Leaves a thin protective layer that visibly reduces new fingerprint marking on high-touch equipment between cleans.
Kitchen-equipment application. Suitable for compatible stainless-steel and chrome surfaces; rinse if used near open food as specified in the product instructions.
Fresh neutral scent. Mild fragrance that clears quickly, appropriate for use near food preparation areas.
Fast-acting formula. Single-wipe application for routine maintenance; no extended dwell time required for everyday cleaning.
How to use & dilute
Prepare. Ready to use. Apply to a microfibre cloth or use a controlled trigger spray on a cool stainless/chrome surface.
Apply. Work in the direction of the grain using a thin film—enough to wet the cloth/surface lightly, not enough to run.
Finish. Buff dry to remove fingerprints and streaks. Follow the stated rinse requirement around open food/food-contact zones.
Equipment & dispenser compatibility
Compatible equipment. Trigger-spray bottles, manual pump sprayers and direct microfibre-cloth application for stainless-steel and chrome maintenance.
Use conditions. For food-service equipment, apply to cool, idle equipment and follow the stated rinse requirement where applicable.
Not intended for. Not intended for foggers, aerosol generators or automatic warewashing/dishwashing chemical feeds.
The chemistry
How does a metal polish clean and protect stainless steel in a single step?
The formula combines a mild solvent-surfactant system that dissolves oily fingerprint residue and food-splash grease, with a light conditioning agent that remains on the surface after wiping.
Usage economy
Coverage-based use. Pack duration depends on trigger output, metal surface area and soil level.
Thin-film application. Use a light film for fingerprints and routine maintenance; heavy application increases wiping effort.
Consumption control. Measure trigger output and use a consistent cloth/application method across housekeeping shifts.
Product specifications
Active system
Solvent-surfactant blend + light conditioning agent
pH
Neutral
Formulation type
Ready-to-use trigger spray
Fragrance
Fresh neutral
Dilution
Ready to use
Application
Trigger spray + microfibre cloth
Rinse after use
Not normally required on exterior non-food-contact surfaces; follow the site rinse/wipe procedure around food-contact areas.
PPE
None required under normal use
Shelf life
24 months from date of manufacture, unopened
Pack size
5 L (refill for trigger spray bottles)
HSN Code
34051000
Manufactured by
Champaran Innovatives Private Limited, India
Caution & storage
Application limits. Use on cool stainless-steel or chrome surfaces only. Do not spray onto hot equipment, open electrical components or walking surfaces.
Food-contact areas. Where used near food preparation, keep polish off direct food-contact surfaces or clean and rinse them according to the site procedure before use.
Storage. Keep tightly closed, upright and protected from direct sunlight and excessive heat. Store away from ignition sources if required by the product label.
Safety & procurement
Safety data / product-specific documentation. care@allesclinx.com
Bulk & institutional procurement. procurement@allesclinx.com
